Test equipment for ISO 28706-2
Today we shipped another "Vetter system" to a well-known Testing, Inspection & Certification company. Such "Vetter system" is used to determine the resistance of vitreous...
Wet enamel preparation
Concept engineering, procurement and installation of various wet enamel preparation equipment
Lumps
Lumps are common enamel defects, which are characterised by rounded raised areas with typically a diameter between 3 to 12 mm.
New enameling plant for Weber-Stephen
Ditmer Enameling Technology BV has assisted Weber-Stephen with the design, installation & commissioning of a large enameling plant for grills in Zabrze, Poland.
This project was realized in only 12 months, despite the COVID-19 epidemic.
Scaling
Scaling is a common enameling defect, which is caused by contamination with materials with a higher melting temperature than enamel.
Other second-hand enameling furnace for sale
One of our relations in Europe has a relative new low thermal mass continuous enameling furnace for sale. (more…)
Major furnace repair completed
During the annual holiday season, we managed to strip down & renew the entire hot zone of an old Ferro enameling furnace with 14 radiant...
Identification of enameling defects
Identifying the correct type of enamel defect is the first & perhaps most important step when troubleshooting industrial enameling processes. Analyzing enameling defects with digital...
Expired: Second hand enameling furnace
One of our relations would like to sell off their gas fired enameling furnace, brand Emisan. The main characteristics of this furnace read as follows...
Blisters
Blisters are a common enamel defect, which is characterized by appearance of circular holes & bubbles in a cooled enameled surface.