Other enamel standards

Below a summary of other standards applicable for enameling and/or enameled objects :

EEA – EEA 8.6.4
Determination of the resistance against thermal shock
Status: To Be Verified

CEN – EN 10025
Hot rolled products of structural steels. General technical delivery conditions
Status: To Be Verified

CEN – EN 10204
Metallic materials. Types of inspection documents
Status: To Be Verified

CEN – EN 10209
Cold rolled low carbon steel flat products for vitreous Enamelling. Technical delivery conditions
Status: To Be Verified

ISO – EN ISO 1463
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
Status: To Be Verified

ISO – EN ISO 2178
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
Status: To Be Verified

ISO – EN ISO 2360
Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method
Status: To Be Verified

CEN – EN12897
Water supply – Specification for indirectly heated unvented (closed) storage water heaters
Status: To Be Verified

CEN – EN14483-2
Determination of resistance to chemical corrosion by citric acid at room temperatuur
Status: To Be Verified

CEN – EN14483-3
Determination of resistance against boiling water
Status: To Be Verified

IEC – IEC 60335-2-15
Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids
Status: To Be Verified

BIS – IS 11469
Method for assessing chemical resistance of enamels used for colour coding and colour marking
Status: To Be Verified

BIS – IS 12038
Permissible limits and test methods for toxic materials released from enamelware in contact with food
Status: To Be Verified

BIS – IS 12038 : Part 1
Vitreous and porcelain enamels – Release of lead and cadmium from enamelled ware in contact with food : Part 1 Method of test
Status: To Be Verified

BIS – IS 12038 : Part 2
Vitreous and porcelain enamels – Release of lead and cadmium from enamelled ware in contact with food : Part 2 Permissible limits
Status: To Be Verified

BIS – IS 13273
Vitreous enamelled inner tanks for storage water heater
Status: To Be Verified

BIS – IS 3972 : Part 1 : Sec 1
Methods of test for vitreous enamelware: Part 1 Production of specimens for testing, Section 1 Enamelled sheet steel
Status: To Be Verified

BIS – IS 3972 : Part 1 : Sec 2
Methods of Test for Vitreous Enamelware – Part 1 : Production of Specimen for Testing – Section 2 : Enamelled Cast Iron
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 1
Methods of Test for Vitreous Enamelware – Part 2 : Test Methods – Section I : Resistance to Citric Acid at Room Temperature and Boiling Temperature
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 11
Methods of test for vitreous enamelware: Part 2 Test method – Section 11 Resistance to abrasion
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 12
Methods of test for vitreous enamelware: Part 2 Test methods – Section 12 Resistance to torsion
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 13
Methods of test for vitreous enamelware : Part 2 Test methods , Section 13 Resistance to warpage
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 14
Methods of test for vitreous enamelware : Part 2 Test methods , Section 14 Resistance to adherence
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 2
Methods of test for vitreous enamelware: Part 2 Test methods, Section 2 Low and high voltage tests for detecting and locating defects
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 3
Methods of test for vitreous enamelware : Part 2 Test methods, Section 3 Resistance to boiling water and water vapour
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 4
Methods of test for vitreous enamelware : Part 2 Test methods, Section 4 Resistance to thermal shock
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 5
Methods of test for vitreous enamelware : Part 2 Test methods, Section 5 Resistance to hot alkali (sodium hydroxide)
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 6
Methods of test for vitreous enamelware : Part 2 Test methods, Section 6 Reflectance and specular gloss
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 7
Methods of test for vitreous enamelware: Part 2 Test methods Section 7 Resistance to boiling hydrochloric acid
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 8
Methods of test for vitreous enamelware: Part 2 Test methods Section 8 Resistance to heat
Status: To Be Verified

BIS – IS 3972 : Part 2 : Sec 9
Methods of test for vitreous enamelware: Part 2 Test methods – Section 9 Resistance to dilute sulphuric acid
Status: To Be Verified

BIS – IS 4682 : Part 2
Code of practice for lining of vessels and equipment for chemical processes Part 2 Glass enamel lining
Status: To Be Verified

BIS – IS 8017
Vitreous enamelled reflectors for use with illuminating device
Status: To Be Verified

BIS – IS 8687 : Part 1
Methods of test for vitreous enamels and frits: Part 1 Sieve analysis
Status: To Be Verified

BIS – IS 8687 : Part 2
Methods of test for vitreous enamels and frits: Part 2 Fusion flow test
Status: To Be Verified

BIS – IS 8709
Method of test for colour retention of vitreous enamel coatings
Status: To Be Verified

BIS – IS 8914
Quality tolerances for water for vitreous enamel industry
Status: To Be Verified

BIS – IS 9485
Cold-reduced and hot-rolled carbon steel sheet for porcelain enamelling
Status: To Be Verified

BIS – IS 9806
Methods of Test for and Permissible Limits of Toxic Materials Released from Ceramicware, Vitreous Enamelware, Glassware and Glass-cerami
Status: To Be Verified

Author

  • Ronald Ditmer

    Ronald Ditmer is the founder and managing director of Ditmer Trading & Consulting BV. Involved in the vitreous enameling industry since 1984 and specialized in setting-up complete enameling plants, designing enameling equipment and troubleshooting enameling processes & equipment.

0 0